Galvanized CHS D48 40NB 1 1/2" for Tube Clamp. Buy Pipe 40NB Online

*Figures given as guidance only, dimensions and weights are subject to manfacturing tolerances and may be altered without prior notice.

Product:	TubeClamp® fittings
Material:	Fittings cast of malleable cast iron - galvanized finish Cast iron fittings or casting to comply with AS 1832 (ISO 5922) Hot Dipped Galvanized finish to comply with AS 4680
Set Screw:	Cup Point Case hardened setscrew in 45CR Alloy Steel (alternative* Stainless Steel 308) Size C42, D48, E60 using 3/8” ISO 228 with 5/16” (8mm) hex key Size A27, B34 using ¼” ISO 228 with ¼” (6.5mm) hex key Size T21 using 1/8 BSF with 3/16” (5mm) hex key
Feature:	No Welding Slip on Structural Fittings
Tensile Load:	min 5,650 N axial load subjected to 40Nm tightened torque (FOS 2.0 min)
Testing:	Internally by Solid Dynamics Engineering Pty Ltd. Testing videos are available upon request
Design:	Tubeclamp Structural Fittings, when properly installed per manufacturing recommendations, meet or exceed all applicable requirements as specified by Australian Standard
Applications:	Handrails, Trolley Bays, Temporary Structure, Shop Fittings, Furnitures and many more.

*Figures given as guidance only, dimensions and weights are subject to manfacturing tolerances and may be altered without prior notice.

Product:	TubeClamp® fittings
Material:	Fittings cast of malleable cast iron - galvanized finish Cast iron fittings or casting to comply with AS 1832 (ISO 5922) Hot Dipped Galvanized finish to comply with AS 4680
Set Screw:	Cup Point Case hardened setscrew in 45CR Alloy Steel (alternative* Stainless Steel 308) Size C42, D48, E60 using 3/8” ISO 228 with 5/16” (8mm) hex key Size A27, B34 using ¼” ISO 228 with ¼” (6.5mm) hex key Size T21 using 1/8 BSF with 3/16” (5mm) hex key
Feature:	No Welding Slip on Structural Fittings
Tensile Load:	min 5,650 N axial load subjected to 40Nm tightened torque (FOS 2.0 min)
Testing:	Internally by Solid Dynamics Engineering Pty Ltd. Testing videos are available upon request
Design:	Tubeclamp Structural Fittings, when properly installed per manufacturing recommendations, meet or exceed all applicable requirements as specified by Australian Standard
Applications:	Handrails, Trolley Bays, Temporary Structure, Shop Fittings, Furnitures and many more.

*Figures given as guidance only, dimensions and weights are subject to manfacturing tolerances and may be altered without prior notice.

Product:	TubeClamp® fittings
Material:	Fittings cast of malleable cast iron - galvanized finish Cast iron fittings or casting to comply with AS 1832 (ISO 5922) Hot Dipped Galvanized finish to comply with AS 4680
Set Screw:	Cup Point Case hardened setscrew in 45CR Alloy Steel (alternative* Stainless Steel 308) Size C42, D48, E60 using 3/8” ISO 228 with 5/16” (8mm) hex key Size A27, B34 using ¼” ISO 228 with ¼” (6.5mm) hex key Size T21 using 1/8 BSF with 3/16” (5mm) hex key
Feature:	No Welding Slip on Structural Fittings
Tensile Load:	min 5,650 N axial load subjected to 40Nm tightened torque (FOS 2.0 min)
Testing:	Internally by Solid Dynamics Engineering Pty Ltd. Testing videos are available upon request
Design:	Tubeclamp Structural Fittings, when properly installed per manufacturing recommendations, meet or exceed all applicable requirements as specified by Australian Standard
Applications:	Handrails, Trolley Bays, Temporary Structure, Shop Fittings, Furnitures and many more.

Material	Steel 250MPa
Finish	Hot Dipped Galvanised (full length) / Dura Gal Users to coat with cold gal after cut
Length	Up to 6.5m (due to transport: longer tube over 2.0 mtr only available to limited delivery)
Compliance	AS 1074
Outside Diameter	48.3mm
Thickness	3.2mm (Medium)
TubeClamp Fitting Size	D48
Origin	Imported

Bar Tube Gal D48 (40NB Medium, 1.50") x 3.2mm thick