TC 48310 - Mobility off set twin handrail stanchion TubeClamp Fitting by Solid Dynamics Australia
TC 48310 - Mobility off set twin handrail stanchion TubeClamp Fitting by Solid Dynamics Australia
TC 48310 - Mobility off set twin handrail stanchion TubeClamp Fitting by Solid Dynamics Australia
TC 48310 - Mobility off set twin handrail stanchion TubeClamp Fitting by Solid Dynamics Australia
TC 48310 - Mobility off set twin handrail stanchion TubeClamp Fitting by Solid Dynamics Australia

48310 - Mobility off set twin handrail stanchion

  • Sale
    • Prices ONLINE ONLY and are GST inclusive, Freight calculated at checkout.

     Price for selected size 
  • $140.90
    •    ea



  • Mobility handrail stanchion featuring dual sided non protruding top rail fittings. Kit includes:

    2 x TC718 Saddle Internal Joint

    1 x TC104D Long Tee

    1 x TC232D Base Flange

    1 x 850mm 40NB tube

    * Fittings are sold individually and do not need to be bought in box quantities. Box quantities may be subject to change without prior notice.

    * Do not perform any pre-drilling, tube cutting, casting uprights or any other dimensionally critical processes prior to receiving fittings.


  • Fitting Size
    Tube Size
    Tubeclamp Code Kee Klamp Code Outside Diameter Imperial Metric
    T 21 4 21.3mm ½ 15NB
    A 27 5 26.9mm ¾ 20NB
    B 34 6 33.7mm 1 25NB
    C 42 7 42.4mm 1 ¼ 32NB
    D 48 8 48.3mm 1 ½ 40NB
    E 60 9 60.3mm 2 50NB

    *Figures given as guidance only, dimensions and weights are subject to manfacturing tolerances and may be altered without prior notice.

  • Product: TubeClamp® fittings
    Material:

    Fittings cast of malleable cast iron - galvanized finish
    Cast iron fittings or casting to comply with AS 1832 (ISO 5922)
    Hot Dipped Galvanized finish to comply with AS 4680
    Set Screw:

    Cup Point Case hardened setscrew in 45CR Alloy Steel (alternative* Stainless Steel 308)
    Size C42, D48, E60 using 3/8” ISO 228 with 5/16” (8mm) hex key
    Size A27, B34 using ¼” ISO 228 with ¼” (6.5mm) hex key
    Size T21 using 1/8 BSF with 3/16” (5mm) hex key
    Feature: No Welding Slip on Structural Fittings
    Tensile Load: min 5,650 N axial load subjected to 40Nm tightened torque (FOS 2.0 min)
    Testing: Internally by Solid Dynamics Engineering Pty Ltd. Testing videos are available upon request
    Design: Tubeclamp Structural Fittings, when properly installed per manufacturing recommendations, meet or exceed all applicable requirements as specified by Australian Standard
    Applications: Handrails, Trolley Bays, Temporary Structure, Shop Fittings, Furnitures and many more.
  • Returns

    Returns will only be accepted provided that:

    (a) the Client has complied with the provisions of clause ; and

    (b) SD has agreed in writing to accept the return of the Goods; and

    (c) the Goods are returned at the Client’s cost within five (5) days of the delivery date; and

    (d) SD will not be liable for Goods which have not been stored or used in a proper manner; and

    (e) the Goods are returned in the condition in which they were delivered and with all packaging material, brochures and instruction material in as new condition as is reasonably possible in the circumstances.

    SD may (at their sole discretion) accept the return of Goods for credit but this may incur a handling fee of up to twenty percent (20%) of the value of the returned Goods plus any freight costs.

    Return would not be accepted for Services Goods (such as: design, installation, consultation, labour time, etc) or custom or non stock-able Goods.

    SD may (at their sole discretion) buy back “Tubeclamp” fittings in any conditions

    per below conditions. Buy Back guarantee will only be accepted provided that

    “Tubeclamp” logo /stamp shall be clearly read-able on the fittings returned

    SD re-value the “Tubeclamp” fitting buy back scheme based on invoice and despatch date