TC 412 - End Termination Single Railing (1R) Stanchion Post Galvanized TubeClamp Fitting by Solid Dynamics Australia





TC 412 - End Termination Single Railing (1R) Stanchion Post Galvanized TubeClamp Fitting by Solid Dynamics Australia





TC 412 - End Termination Single Railing (1R) Stanchion Post Galvanized TubeClamp Fitting by Solid Dynamics Australia





TC 412 - End Termination Single Railing (1R) Stanchion Post Galvanized TubeClamp Fitting by Solid Dynamics Australia





TC 412 - End Termination Single Railing (1R) Stanchion Post Galvanized TubeClamp Fitting by Solid Dynamics Australia
TC 412 - End Termination Single Railing (1R) Stanchion Post Galvanized TubeClamp Fitting by Solid Dynamics Australia
TC 412 - End Termination Single Railing (1R) Stanchion Post Galvanized TubeClamp Fitting by Solid Dynamics Australia
TC 412 - End Termination Single Railing (1R) Stanchion Post Galvanized TubeClamp Fitting by Solid Dynamics Australia

412 - End Termination Single Railing (1R) Stanchion Post Galvanized

  • Sale
  • $59.39
  • $62.17
Tax included.

A End Termination post assembly used in the installation of handrails. Available in C-32NB (42mm OD)  & D-40NB (48mm OD) Galvanised

Fitting Size
Tube Size
Tubeclamp Code
Outside Diameter
Imperial
Metric
T 21
21.3mm
½
15NB
A 27
26.9mm
¾
20NB
B 34
33.7mm
1
25NB
C 42
42.4mm
1 ¼
32NB
D 48
48.3mm
1 ½
40NB
E 60
60.3mm
2
50NB

*Figures given as guidance only, dimensions and weights are subject to manfacturing tolerances and may be altered without prior notice.




Product: TubeClamp® fittings
Material:

Fittings cast of malleable cast iron - galvanized finish
Cast iron fittings or casting to comply with AS 1832 (ISO 5922)
Hot Dipped Galvanized finish to comply with AS 4680
Set Screw:

Cup Point Case hardened setscrew in 45CR Alloy Steel (alternative* Stainless Steel 308)
Size C42, D48, E60 using 3/8” ISO 228 with 5/16” (8mm) hex key
Size A27, B34 using ¼” ISO 228 with ¼” (6.5mm) hex key
Size T21 using 1/8 BSF with 3/16” (5mm) hex key
Feature: No Welding Slip on Structural Fittings
Tensile Load: min 5,650 N axial load subjected to 40Nm tightened torque (FOS 2.0 min)
Testing: Internally by Solid Dynamics Engineering Pty Ltd. Testing videos are available upon request
Design: Tubeclamp Structural Fittings, when properly installed per manufacturing recommendations, meet or exceed all applicable requirements as specified by Australian Standard
Applications: Handrails, Trolley Bays, Temporary Structure, Shop Fittings, Furnitures and many more.