-
A vertical post assembly without any horizontal fittings used in the installation of handrails. All pieces are galvanised, powder coating options are available upon request.
D Weld
48.3mm outer diameter tube 1000mm long welded onto a flange with two mounting holds.* Fittings are sold individually and do not need to be bought in box quantities. Box quantities may be subject to change without prior notice.
* Do not perform any pre-drilling, tube cutting, casting uprights or any other dimensionally critical processes prior to receiving fittings.
-
Fitting Size Tube Size Tubeclamp Code Kee Klamp Code Outside Diameter Imperial Metric T 21 4 21.3mm ½ 15NB A 27 5 26.9mm ¾ 20NB B 34 6 33.7mm 1 25NB C 42 7 42.4mm 1 ¼ 32NB D 48 8 48.3mm 1 ½ 40NB E 60 9 60.3mm 2 50NB *Figures given as guidance only, dimensions and weights are subject to manfacturing tolerances and may be altered without prior notice.
-
Product: TubeClamp® fittings Material: Fittings cast of malleable cast iron - galvanized finish
Cast iron fittings or casting to comply with AS 1832 (ISO 5922)
Hot Dipped Galvanized finish to comply with AS 4680Set Screw: Cup Point Case hardened setscrew in 45CR Alloy Steel (alternative* Stainless Steel 308)
Size C42, D48, E60 using 3/8” ISO 228 with 5/16” (8mm) hex key
Size A27, B34 using ¼” ISO 228 with ¼” (6.5mm) hex key
Size T21 using 1/8 BSF with 3/16” (5mm) hex keyFeature: No Welding Slip on Structural Fittings Tensile Load: min 5,650 N axial load subjected to 40Nm tightened torque (FOS 2.0 min) Testing: Internally by Solid Dynamics Engineering Pty Ltd. Testing videos are available upon request Design: Tubeclamp Structural Fittings, when properly installed per manufacturing recommendations, meet or exceed all applicable requirements as specified by Australian Standard Applications: Handrails, Trolley Bays, Temporary Structure, Shop Fittings, Furnitures and many more.
- Returns Returns will only be accepted provided that: (a) the Client has complied with the provisions of clause ; and (b) SD has agreed in writing to accept the return of the Goods; and (c) the Goods are returned at the Client’s cost within five (5) days of the delivery date; and (d) SD will not be liable for Goods which have not been stored or used in a proper manner; and (e) the Goods are returned in the condition in which they were delivered and with all packaging material, brochures and instruction material in as new condition as is reasonably possible in the circumstances. SD may (at their sole discretion) accept the return of Goods for credit but this may incur a handling fee of up to twenty percent (20%) of the value of the returned Goods plus any freight costs. Return would not be accepted for Services Goods (such as: design, installation, consultation, labour time, etc) or custom or non stock-able Goods. SD may (at their sole discretion) buy back “Tubeclamp” fittings in any conditions per below conditions. Buy Back guarantee will only be accepted provided that “Tubeclamp” logo /stamp shall be clearly read-able on the fittings returned SD re-value the “Tubeclamp” fitting buy back scheme based on invoice and despatch date